manufacturer

manufacturer(17)

Demei Building Materials Engineering Co.

All Products >> manufacturer

Showing 1 - 10 of 17, total 2 pages [First] [Previous] [Next] [Last]

ultra-fine cement grout
Specification: 25kg/bag
Detail: Description: The micro-fine cement grout is a new generation of rigid inorganic grouting material. It composed of high strength micro-fine cement, expander and vulcanizing agent. Merit: ¡ñ Non-toxic, odourless, pollution...

macromolecule composite waterproof membrane
Specification: 1.0~1.5
Detail: Characteristic: It use Polythene resin as core layer and terylene as strengthen layer. It can be bonded with cement directly, so the construction process is convenient.

metalline waterproof membrane
Specification: 1.0~1.5
Detail: Description: It is composed of tinsel and macromolecule materials, and can be used in waterproof project, especially in plantroof to resist penetration from root. Characteristic: It has traits such as close-grained tex...

high intensity and non- shrink cementitious grout
Specification: 50kg/bag
Detail: Description: ***RGrout-618 is a cement based grout composed of sand, concrete additives and other materials. It can be used after adding some water and mixing round. It represents performance like flowable, tiny expansion, ...

double fluid pa water-proof coating sunlight 1000
Specification: powder: paper box 5kg/bag 25kg/box ; fluid: plastic barrel, 50k
Detail: Characteristic: 1. Water-proof coating composed of organic fluid and inorganic powder; 2. Nontoxic and inodorous; 3. Can be used on all kinds of base level either dry or saturated; 4. It can be confected to colorful coat ...

epoxy resin grouting for concrete crack
Specification: A:20kg/barrel, B:5kg/barrel
Detail: Characteristic: 1¡¢Double component epoxy resin adhesive; 2¡¢Low viscosity, high fluidity and good penetrability; 3¡¢Its setting time can be regulated according to project need

water-proofing coating for bridge
Specification: 200kg/barrel
Detail: Characteristic: ¡ñ It can prevent reinforcing steel bar from erosion because of leakage, so it can prolong useful life of the bridge; ¡ñ It can be used on bridge under the temperature between -20¡æ and 140¡æ; ¡ñ It so...

pu grouting (stanch) coating
Specification: 16kg/barrel
Detail: Characteristic: 1. Use alone, no need to mix with another liquid; 2. It¡¯s a hydrophobe, which has a high chemical stability and a high intensity; 3. Be resistant to acid, alkali, organic solvent and chemical corruption. 4...

anta antiskid agent
Specification: 500ml/bottle, 5kg/barrel, 10kg/barrel
Detail: Characteristic: 1¡¢Tran***rent solution; 2¡¢Innocuity; 3¡¢It can increase friction factor effectively after it had been used on the floor; 4¡¢It also has sterilization effect in order to improve environment; 5¡¢It doesn...

pu grouting (stanch) coating
Specification: 16kg/barrel
Detail: Characteristic: 1. Single fluid, no need to mix with another liquid; 2. It has a good hydrophilicity, and it can react to water so as to block up high pressure water. 3. It can bond with concrete firmly, and can create hi...


Showing 1 - 10 of 17, total 2 pages [First] [Previous] [Next] [Last]
1 2

Demei Building Materials Engineering Co. All Products >> manufacturer

Demei Building Materials Engineering Co.

All Products >> manufacturer